KTM A65408915044 Instructions De Montage page 36

5 ASSEMBLY
–
–
–
–
–
14
Align both turn signals, tighten nuts
Guideline
License plate holder screw connec-
tion
For each adjustment process, loosen the screw connections and then tighten them with the tightening
torque.
cs
Position rubber cover .
bt
Preassemble cable ties (included) on the adhesive mounts.
cq
Mount rubber grommet (included).
Route the cables without tension, thread them through the rubber grommet and secure them with the
cable ties.
ct
.
M6 8 Nm (5.9 lbf ft)
505102-01