When the appliance is cooking, you will see the interface below, on which you can press the button "Reset" to
change the time and temperature setting, or press the button "Stop" to stop running the appliance. Before the
appliance enters into standby, the blower will work for a few seconds with a countdown.
2) Menu selection
There are menu buttons same as that on the control panel of the appliance. Press any one of the menu
buttons, you can either press the button "Run" to directly make the appliance start working, or customize your
desired setting first: press the "Cooking Time" bar to select and confirm the desired cooking time; press the
"Cooking Temperature" bar to select and confirm the desired cooking temperature.
pic.E
3) Automatic Start timer (for APP control only)
This is a function that cannot be fulfilled on the control panel of the appliance. Press the button
press the button "add". Select the exact time that you want the appliance to start work (left list – for hour
value; right list – for minute value). You can set the desired cooking temperature and cooking time for the
automatic start on this interface. Press the "Save" at the top right corner to save your setting.
Then you will find the timer shown as below.(pic. G) It means the appliance will automatically start working at
5:30 p.m. To cancel this timer, just press the green button besides to switch it to grey. To delete this timer, you
can move this timer section to the left and press the button "Delete". (pic. H) To add a new timer, just press
the button "add" at the bottom of the interface and make the settings.
pic.G
Note: The timing may have an error of about 30 seconds.
4) Other buttons on the Tuya APP (at the top of the interface)
① Press the button, you can go back to the previous page.
② Press the button, you will find more options, among which the option "Share Device" allows you to
share the operation of the appliance to other people, and the "Remove Device" at bottom allows you
pic. D
pic. F
pic. H
- 10 -
and then