Torin BIG RED TRQ50002 Manuel Du Propriétaire page 9

TO ADD JACK OIL:
1. Position the jack on level ground and lower the
saddle.
2. Remove the oil plug.
3. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
4. Replace oil plug.
5. Perform the Air Purge Procedure.
On Level Ground
TO REPLACE JACK OIL:
1. Position the jack on level ground and lower the
saddle.
2. Open release valve by turning handle counter-
clockwise (4 full turns).
3. Remove the oil fill plug.
4. Turn the jack on its side so that old oil will drain
from the oil fill hole.
9
On Level Ground