Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
1. Familiarize yourself with the jack
Saddle
2Piece
Handle
Release Valve
2. Attach the 2 handle pieces making sure to align
the holes on both sections.
3. Line up the handle to the handle socket located
on the side of the jack, then insert the handle inside
the handle socket.
4. Secure the handle in place inside the handle
socket. Without any vehicle on the jack. Cycle the lift
up and down several times to insure the hydraulic
system is operating properly. (Perform to the Air
Purge Procedure
before first use.)
Lift Control Walve
Air Motor
Insert Handle Here
SYSTEM AIR PURGE PROCEDURE
IMPORTANT: BEFORE FIRST USE
Perform the following Air Purge Procedure to
remove any air that may have been introduced into
the hydraulic system as a result of product shipment
and handling. This step is to be completed without
any weight on the jack.
1. Turn release valve counterclockwise on full turn to
the open position.
2. Rapidly pump the handle 6-8 times. Leave handle
in down position to expose oil fill plug.
3. With a flat blade screwdriver, push the oil fill plug
slightly to the side to purge trapped air from system.
(Use cation not to tear or puncture the oil plug.)
4. Turn release valve clockwise to the closed
position.
5. Jack is now ready for use. Check for proper pump
action.
6
Publicité
