EINHELL 4350413 Mode D'emploi page 14

38. Fixed base scale
39. Countersunk head screws
40. Fixed base cover
41. Router bit (not supplied)
42. Battery (not supplied)
43. Push lock button
44. Battery capacity indicator
45. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Cordless routing unit
•
Plunge base
•
Fixed base
•
Dust chutes (2x)
•
Compass point
•
Collet (1/4")
•
Trimmer roller guide
•
Edge guide
•
Open-ended wrench (2x)
•
Template guide
•
Safety guard
•
Original operating instruction with safety
information
Separately available accessories
18V 1.5Ah PXC Lithium-Ion battery
18V 2.0Ah PXC Lithium-Ion battery
18V 2.5Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Lithium-Ion battery
18V 4.0Ah PXC Lithium-Ion battery
18V 3.0Ah PXC Plus Lithium-Ion battery
18V 4.0Ah PXC Plus Lithium-Ion battery
Anl_TP_RO_18_Set_Li_BL_SPK7_USA.indb 14 Anl_TP_RO_18_Set_Li_BL_SPK7_USA.indb 14
EN
18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
This cordless router with fi xed & plunge base is
designed primarily for the machining of wood and
plastic. Its uses include the cutting out of knots,
the cutting of slots, the forming of recesses, the
copying of curves and lettering, fl ush-trimming,
etc. This cordless router with fi xed & plunge base
is not allowed to be used for the machining of
metal, stone, etc.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
4. Technical data
Motor power supply: ............................ 18V
No load speed: .........10,000 - 30,000 RPM (min
Stroke height (routing depth): ....................... 1.58"
Collet:: ......................................................... Ø ¼"
Max. router bit diameter: .............................. 1.18"
Weight - Cordless Router
with plunge base (Tool only): ....................5.29 lbs
Weight - Cordless Palm Router
with fi xed base (Tool only): .........................2.87 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
- 14 -
)
-1
24.05.2023 09:44:14 24.05.2023 09:44:14