EINHELL 11043 Mode D'emploi D'origine page 14

Anleitung_RG_EL_2700_E_SPK7__ 07.10.13 13:34 Seite 14
GB
and blow the foreign objects safely away from
them.
Maintenance and storage
b Check that all nuts, bolts and screws are
securely tightened in order to be sure that the
machine is in a safe working condition.
b Frequently check the debris bag for signs of
wear and deformation.
b Use only genuine accessories and spare parts.
b For your own safety, replace worn or damaged
parts without delay.
b Electric tools should be kept in a dry place when
not in use.
b If the mains cable for this device is damaged, it
must be replaced by the manufacturer or its
after-sales service or similarly trained personnel
to avoid danger.
The tool can be plugged into any socket-outlet (with
230 V AC) that is equipped with a 10A fuse or higher.
The socket-outlet has to be safeguarded by an earth-
leakage circuit breaker (e.l.c.b.). The operating
current must not exceed 30 mA.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the
equipment (see Fig. 9)
1. Read the directions for use before operating the
tool.
2. Do not use the tool in rain or snow. Do not ex-
pose the tool to wet conditions.
3. Keep all other persons away from the danger
zone.
4. Wear goggles and ear muffs.
5. Switch off the tool and pull out the power plug be-
fore carrying out any cleaning or maintenance
work.
6. Rotating parts. Keep your hands and feet away
from all openings.
14
2. Layout (Fig. 1/2)
1. Front suction tube
2. Rear suction tube
3. Additional handle
4. Carrying strap
5. ON/OFF switch
6. Power cable
7. Debris bag
8. Selector switch for vacuum/blower
9. Castors
10. Speed controller
11. Wheel support
12. Screw for fitting the suction tube
13. Screw for fitting the housing
14. Additional nozzle
15. Rake attachment
16. Screw (short) for fitting the housing
3. Items supplied
Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Original operating instructions
n
Safety instructions
n