Publicité
Les langues disponibles
Les langues disponibles
CAUTION:
cutting teeth must have them covered securely if it is
to be on the Versatrack™ Trackwall.
2. Flip or pull open the integral hang hook
when locked into position.
3. Mount the integral hang hook to the
Versatrack™ Trackwall.
nOTE: Versatrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1-888-331-4569.
Fig. O
Replacement Accessories
WARNING:
of serious personal injury, turn appliance
off and remove battery before making any
adjustments or removing/installing attachments
or accessories.
WARNING:
not recommended by CRAFTSMAN for use with this
appliance could be hazardous.
WARNING:
or any accessory or attachment other than those
recommended by CRAFTSMAN on this trimmer.
Serious injury or product damage may result.
When replacing the line, use .080" (2 mm) or 0.095"
(2.4 mm) diameter line. Use CRAFTSMAN replacement line
Model No. CMZST080T5 or CMZST080TP. Other sizes may
degrade performance or cause damage to the trimmer.
Replacing Spool Assembly (Fig. P, Q)
1. Rotate the spool housing
spindle plate aligns with notch
Insert a screwdriver through the notch and into the
hole, to prevent the spindle
2. Unscrew and remove the spool housing by turning the
spool grip cover
20
clockwise.
Any product with exposed
23
. It clicks
23
To reduce the risk
The use of any accessory
Do not use any blades,
9
until the hole
24
in the
in the housing.
25
26
from turning.
nOTE: Do not try to remove the spool housing by turning
the spool head
30
.
3. Remove spindle plate
27
housing. Remove any dirt and grass from the motor
housing and spindle plate.
4. Install spindle plate onto the spindle, so the double D
shaped retaining nut on the spindle sits inside the base
of the spindle plate.
5. Align the spindle plate hole and notch, insert a
screwdriver back into the hole and thread the new
spool housing counterclockwise. Securely tighten the
new spool housing onto the spindle.
Fig. P
24
20
30
Fig. Q
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact CRAFTSMAN, call
1-888-331-4569.
Use CRAFTSMAN Model No. CMZST260H.
English
before installing a new
25
27
26
9
26
30
11
Publicité
