Publicité
Les langues disponibles
Les langues disponibles
2 Mounting
Device in the format 116
1.
Insert the device from the front into the pan-
el cut-out and ensure that the seal is correct-
ly positioned.
2.
Push the mounting frame from the panel
rear onto the device body and press the
springs against the panel rear until the de-
tent lugs engage in their slots and the frame
is sufficiently fastened.
2.4
Cleaning
The front of the device (front foil) can be cleaned with standard detergents, rinsing and cleaning agents.
CAUTION!
The front of the device is not resistant to aggressive acids and lyes, scouring agents, and clean-
ing with a pressure cleaner.
Use of these media can cause damage.
Only clean the front of the device with suitable agents.
16
1.
Devices in the formats 108H, 108Q, and 104
2.
1.
2.
3.
1.
Insert the device from the front into the pan-
el cut-out and ensure that the seal is correct-
ly positioned.
From behind the panel, insert both mounting
elements at the side into the three recesses
of the device case using the guide lugs.
Press both mounting elements evenly with
the springs against the panel rear until the
detent lugs engage in their slots and the
frame is sufficiently fastened.
3.
2.
Publicité
