JUMO meroVIEW 104 Notice page 57

Format 104 (96 mm × 96 mm)
Panel cut-outs according to DIN IEC 61554
Format (front frame dimensions)
116 (48 mm × 48 mm)
108H (48 mm × 96 mm)
108Q (96 mm × 48 mm)
104 (96 mm × 96 mm)
a
When connecting a USB flash drive to the device, allow for sufficient distance if necessary.
2.3 Panel mounting
CAUTION!
The front of the device and housing have different protection types!
The protection type IP65 (front-side) is only guaranteed if the seal is flush and even.
 Use the mounting frame or both mounting elements as shown in the figure and ensure an even at-
tachment!
Panel cut-out
(width x height)
+0.6 +0.6
45 mm × 45 mm
+0.6 +0.8
45 mm × 92 mm
+0.8 +0.6
92 mm × 45 mm
+0.8 +0.8
92 mm × 92 mm
2 Mounting
Minimum spacing of panel cut-
outs (for close mounting)
Horizontal Vertical
a
45 mm 30 mm
35 mm 45 mm
45 mm 35 mm
35 mm 45 mm
15