Optika Italy SLX Serie Manuel D'instructions page 13

5. Install the head holder. Unscrew the locking knob ③ and in-
sert the arm for the focus support from above ② into the hole
of the horizontal arm. (Fig. 12 - 13)
6. Once fully inserted, tighten the fixing screw ④ (Fig. 13)
7. Insert from below the focusing system, tighten the fixing
screw ⑤ and re-tighten the locking knob ③ from below. (Fig.
14 - 15)
8. Install the microscope body as explained in chapter 8.1.1
④
Page 13
②
③
F ig. 12 F ig. 12
F ig. 13 F ig. 13
⑤
F ig. 14 F ig. 14
③
F ig. 15 F ig. 15