Publicité
Carry handle
The carrying handle is also used to lock
the appliance head and the container.
To unlock, push the bow all the way for-
ward until you clear the lock.
(see description / illustration
Grab the appliance head by the handle
recess and remove it.
In the carrying position, the bow is
pointing up, during work with the appli-
ance, swivel the bow toward the back
until the operating controls on the appli-
ance are accessible.
Accessory compartment, appli-
ance head
This accessory compartment allows the
storage of suction nozzles on the appli-
ance.
Accessory compartment, hook
This accessory compartment allows the
storage of the suction hose, the mains
cable and the suction nozzles.
(see description / illustration
Rotary switch with two
Eco power levels
Position 0: Appliance is switched off
Position 1 eco: Suction or blowing (re-
duced suction power).
Position 2 eco: Suction or blowing
(max. suction power).
(see description / illustration
Parking position
To rest the floor nozzle during work in-
terruptions.
(see description / illustration
Accessory storage container
This accessory compartment allows the
storage of the suction pipes or other ac-
cessories.
(see description / illustration
12
Steering roller
The steering rollers are located in the
compartment when the appliance is de-
livered. These must be attached prior to
starting up the appliance.
)
(see description / illustration
Filter bag
Note: Do not use a filter bag for wet vacu-
uming!
Recommendation: To vacuum fine
dust, use the filter bag.
(see description / illustration
Cartridge filter
(already installed in the appliance)
The cartridge filter must always be in-
stalled - with wet and dry vacuuming.
Note: Let the wet cartridge filter dry pri-
or to using it for dry vacuuming.
(see description / illustration
Suction hose with handle
Slide the suction hose into the connec-
)
tion, it will lock into place.
(see description / illustration
Note: In order to disconnect it, push
down with your thumb and pull the suc-
tion hose out.
Suction tubes 2 x 0.5 m
Connect both suction pipes and con-
)
nect them to the suction hose.
(see description / illustration
Floor nozzle
(with inserts)
Use the appropriate insert for vacuum-
)
ing on hard surfaces and carpets.
Hard surfaces, wet vacuuming: Use
the insert with 2 rubber lips.
Hard surfaces, dry vacuuming: Use
the insert with 2 bristles.
Carpets, wet and dry vacuuming:
Work without an insert.
)
– 7
EN
)
)
)
)
)
Publicité
