Optika Italy B-150R-PL Serie Manuel D'instructions page 12

8.2 Polarizing set (optional)
1. Place the polarizer on the light exit ① at the base of the mi-
croscope. (Fig. 5)
2. Loosen the head fixing knob ② and remove the head from
the microscope frame. (Fig. 6)
3. Insert the analyzer ③ into the hole inside the frame. (Fig. 7)
4. Put back the head into its original position and lock the fixing
knob.
③
Page 12
①
F ig. 5 F ig. 5
②
F ig. 6 F ig. 6
F ig. 7 F ig. 7