Publicité
Les langues disponibles
Les langues disponibles
1
Safety Information
Please read this operating instruction manual thoroughly.
Intended use
These walkie−talkies have been conceived for communication with other walkie−talkies complying to the same stan-
dards. Any other use is considered unintended use. Unauthorised modification or reconstruction is not permitted. Under
no circumstances open the devices or complete any repair work yourself.
Ambient conditions
Prevent excessive exposure to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight.
Do not use the walkie−talkies in potentially explosive areas.
Batteries
Caution: Do not mix the types of battery! Only use batteries of the same brand at any one time! Pay attention
to correct polarity. If the walkie−talkies will be out of use for some time, remove the batteries.
Medical equipment
Caution: Never use the walkie−talkies in the vicinity of medical equipment. Effects on such equipment cannot
be fully ruled out. Walkie−talkies can cause an unpleasant humming sound in hearing aids.
Disposal
You are obliged to dispose of consumable goods according to legal requirements. The adjacent symbol indi-
cates that electrical and electronic apparatus no longer required must be disposed of separate from domestic
waste.
Electrical and electronic devices must be disposed of at suitable collection points provided by the public
waste authorities.
Batteries must be disposed of at the point of sale or at the appropriate collection points provided by the public
waste authorities.
Packaging materials must be disposed of according to local regulations.
2
Preparing the Walkie−Talkies for Use
Safety information
Caution: It is essential to read the Safety Information in Chapter 1 before starting up.
Checking the package contents
The package contains: > two walkie−talkies with belt clip, > an operating manual
Inserting the batteries
Open the battery compartment cover. Insert the batteries
(not contained in the material supplied). Only use
alkaline AAA 1.5V batteries. Pay attention to correct polarity.
Close the battery compartment cover.
Battery status
The current battery charge status is indicated in the display:
Full
The batteries must to be replaced as soon as the indicator flashes in the display and acoustic warning signals are is-
sued.
Energy−save mode
Your walkie−talkies are provided with an energy−save mode to increase the service life of the batteries. If no buttons on
the walkie−talkies are pressed for a period of 4 seconds, energy−save mode is activated. Energy−save mode is deacti-
vated as soon as you press a button or a signal is received.
Attaching the belt clip
Slide the belt clip in the guide from the top until it audibly snaps into place.
To detach the belt clip, prize the fastening tab up a little with your fingernail
and slide the belt clip upwards.
3
Operating Elements
The buttons in this operating manual are subsequently depicted with a uniform contour.
Therefore, slight deviations in the appearance of the symbols on the walkie−talkie
buttons compared to those depicted here are possible.
Empty
Publicité
