Hitachi RAF-25NX2 Mode D'emploi page 11

FAN OPERATION
You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit
at the end of summer.
FAN SPEED (AUTO)
For the heating operation
For the cooling operation
1
Press the FUNCTION selector so that the display indicates
Press the
(HI)
2
(MED)
(LOW)
(SILENT) : Silent.
START
Press the
STOP
Press the button again to stop operation.
... When the AUTO fan speed mode is set in the cooling/heating operation:
• The fan speed will automatically change according to the temperature of
discharged air.
• As room temperature reaches the preset temperature, a very light breeze
will blow.
• Operation starts in the "HI" mode to reach the preset temperature.
• As room temperature approaches the preset temperature, fan speed
automatically switches to "LOW".
(FAN SPEED) button.
: The strongest air blow.
: Quiet.
: More quiet.
(START/STOP) button. Fan operation starts with a beep.
– 11 –
(FAN).