Publicité
Les langues disponibles
Les langues disponibles
7. BASIC SETTINGS
You can configure the appliance by changing basic settings according to your needs.
Number
Setting
1
Water hardness
2
Rinse aid level
3
End sound
4
Auto door open
5
Key tones
6
Latest programme
selection
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode.
When the appliance is in setting mode, the
bars of the ECOMETER represent available
settings. For each setting, a dedicated bar of
the ECOMETER flashes.
The order of the basic settings presented in
the table is also the order of the settings on
the ECOMETER:
1 2
3 4 5 6
7.1 Setting mode
How to navigate in setting mode
You can navigate in setting mode using
MY TIME selection bar.
Values
Description 1)
1L - 10L (default:
Adjust the level of the water softener according to the
5L)
water hardness in your area.
0A - 6A (default: 4A) Adjust the level of the rinse aid according to the nec‐
essary dosage.
On
Activate or deactivate the acoustic signal for the end
Off (default)
of a programme.
On (default)
Activate or deactivate the AirDry.
Off
On (default)
Activate or deactivate the sound of the buttons when
Off
pressed.
On
Enable or disable the automatic selection of the most
Off (default)
recently used programme and options.
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch between
the basic settings and to change their value.
Use OK to enter the selected setting and to
confirm changing its value.
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
To enter setting mode, press and hold
simultaneously
seconds.
The lights related to the Previous, OK and
Next are on.
A
B
C
and
ENGLISH
for about 3
11
Publicité
