Handling And Operation; Switching On And Off; Functions - SilverCrest SNS 45 A3 Mode D'emploi

Handling and operation

Switching On and Off
GB

Functions

134
In this chapter you receive important information for the handling and operation
of the appliance.
NOTICE
► See also the chapter Appliance and Accessories.
♦
Switch the UV appliance 1 on by pressing the ON/OFF switch 2 to the
position "I". The operating indicator 3 lights up and the appliance is ready
for use.
♦
Switch the UV appliance 1 off by pressing the ON/OFF switch 2 to the
position "0". The operating indicator 3 extinguishes.
Three diff erent treatment times can be set on the appliance:
90 seconds (Button 9)
■
150 seconds (Button 7)
■
240 seconds (Button 5)
■
♦
Switch the UV lamps on by pressing the Start button 0.
♦
Select the desired treatment time and then press the appropriate time preselect
button 9, 7 or 5.
NOTICE
► The UV lamps switch off automatically after the lapse of the preset time.
♦
Press the time preselect button 9, 7 or 5 and the Start button 0 once
again as described above for any further treatments.
SNS 45 A3