Handling And Operation; Switching On And Off; Functions - SilverCrest SNS 45 A2 Mode D'emploi

Handling and operation

In this chapter you receive important information for the handling and operation
of the appliance.
NOTICE
► See also the chapter Appliance and Accessories.
Switching On and Off
Switch the UV appliance 1 on by pressing the On/Off switch 2 to the
position "I". The operating indicator 3 lights up and the appliance is ready
for use.
Switch the UV appliance 1 off by pressing the On/Off switch 2 to the posi-
tion "0". The operating indicator 3 extinguishes.

Functions

Three diff erent treatment times can be set on the appliance:
90 seconds (Button 9)
■
150 seconds (Button 7)
■
240 seconds (Button 5)
■
Switch the UV lamps on by pressing the Start button 0.
Select the desired treatment time and then press the appropriate time preselect
button 9, 7 or 5.
NOTICE
► The UV lamps switch off automatically after the lapse of the preset time.
Press the time preselect button 9, 7 or 5 and the Start button 0 once
again as described above for any further treatments.
SNS 45 A2
GB
73