Switch Contacts; Wiring Scheme - WIKA GDM-RC-100 Mode D'emploi

5. Commissioning, operation
5.2.3 Connection terminals and wire preparation
The connection terminals are suitable for the following types of single conductor or
cross-sections:
EN
Connection terminals and wire preparation
Types of single
conductors
Wire length
Maximum length of
the bare wire end
Number of wires /
Cross-sections
Recommended
tightening torque

5.2.4 Switch contacts

The position of the switch points and the switching functions are indicated on the
■
product label.
The assignment of the individual switching functions is marked on a sticker affixed to
■
the mating connector at the terminal:

Wiring scheme

First digit
Second digit
14
Connection terminals of
the socket terminal strip
Solid wire core
■
Flexible strand
■
Flexible strand with end splice
■
≥ 90 mm
Max. 5.5 mm
1 x 0.5 mm² to 1 x 2.5 mm²
0.5 Nm
1x – Switch contact S1
■
2x – Switch contact S2
■
3x – Switch contact S3
■
4x – Switch contact S4
■
x1 – Common
■
x2 – Normally closed
■
x3 – Normally open
■
Connection terminals of
the protective conductor
Solid wire core
■
Flexible strand with end splice
■
≥ 120 mm
Max. 8 mm
1.2 Nm
WIKA operating instructions, model GDM-RC-100