Toshiba COLORSTREAM 27A46C Manuel De L'utilisateur page 7

Connecting your TV
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use "F" connectors.
• Standard A/V (audio/video) cables are usually color coded accord-
ing to use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo left (or mono) channel. If you look at the rear
panel of the TV, you will see that the terminals are color coded in
the same manner as the cables.
• An S-video cable provides better picture performance than a
standard video cable. S-video cables can only be used with S-video
compatible components.
• Component video cables come in sets of three and provide the best
picture performance. Component video cables can only be used
with component video compatible components.
ANTENNA
Coaxial Cable
AUDIO
Cables
VIDEO
Cable
Connecting a VCR
This connection allows you to watch local channels and video programs,
play or record on the VCR while watching TV, and record from one
channel while watching another channel.
ANT (75Ω)
Cable Lead-in
from cable box
or antenna
IN from ANT
CH 3
CH 4
J3S20421A(E)_P07-16
S-Video
Cable
Component video
Cables
IN OUT
Y
VIDEO
P
B
L/MONO
S-VIDEO AUDIO
P
R
R
VIDEO 1 VIDEO 2
Stereo VCR
IN
OUT to TV
OUT
L R
VIDEO AUDIO
7
You will need:
• two coaxial cables
• one set of standard A/V cables
TV
Note:
If using a mono VCR, connect L/Mono to
VIDEO
VCR Audio OUT using only one audio cable.
For better picture quality, if your VCR has S-
L/MONO
video, you can use an S-video cable instead
AUDIO
of the standard video cable. Do not connect a
standard video cable and an S-video cable to
R
VIDEO1 simultaneously.
The unauthorized recording, use,
distribution or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the Copy-
right Laws of the United States and other
countries, and may subject you to civil
and criminal liability.
7
2/12/05, 5:24 PM
NOTICE: RISK OF
EQUIPMENT DAMAGE!
Do not plug in any power cords
until you have finished connecting
all equipment.