Publicité
Les langues disponibles
Les langues disponibles
Loading
Adjustable Rack
(select models)
The Adjustable Upper Rack (select models) can be
raised or lowered to accommodate taller plates,
platters, pans, etc. in the upper or lower racks. Full
size dinner plates can be loaded in the upper rack if it
is in the lower position. Rack is easier to adjust before
it is fully loaded.
To lower the rack:
1. Pull the rack fully out.
2. Place thumbs
on each lever
on the adjuster
while holding
rack with hands.
3. Press down on
the levers with
thumbs and
push rack down.
The rack will come to a stop when it is in position.
To raise the rack:
1. Pull the rack fully out.
2. Place hands on both sides and lift up until rack
comes to a stop and latches in place.
Notes
• The dishwasher will not
operate correctly if the
rack wash arm
connection is not aligned
with one of the water
inlet holes on back wall
of the dishwasher.
• The left and right side adjusters on the racks
must both be fully in the upward or downward
position for proper connection.
Adjusters
5
Removing the Upper Rack
The rack can be removed when tall or oversized items
need to be loaded into the lower rack. Unload the
rack before removing it from the dishwasher.
To remove rack with push tab rack stops (select
models):
1. Roll the rack
1
to
1
of the way out.
⁄
⁄
3
2
2. To remove each plastic push tab rack stop from the
end of each track, push inward (toward the rack) on
the ridged area of the rack stop. The rack stop will
snap open and can be easily removed by pulling
straight out. Take
care to support
the track while
removing rack
stops.
3. Roll the rack all
the way out of the
track and remove
from the
dishwasher.
To replace:
• Reverse the above procedure to replace the rack into
the dishwasher.
To remove rack with pull tab rack stops (select
models):
1. Roll the rack
1
to
1
of the way out.
⁄
⁄
3
2
2. To remove each plastic pull tab rack stop from the
end of each track, locate two-prong tab on inside of
the rail and pull tab out toward rack. The rack stop
can then be easily removed by pulling it straight out.
Take care to
support the track
while removing
the rack stops.
3. Roll the rack all
the way out of the
track and remove
from the
dishwasher.
To replace:
• Reverse the above
procedure to replace the rack into the dishwasher.
Push Tab
Rack Stop
Pull Tab
Rack Stop
Publicité
