Cleaning The Device - DS Produkte VC9388 Mode D'emploi

EN

Cleaning the device

ATTENTION!
• Prior to each cleaning, pull the plug out of the socket.
• The fi lters may not be cleaned in the washing machine.
• Only air dry the fi lters and do not in any case use a hair dryer.
• Do not use any chemical cleaners to clean the device. They could damage the de-
vice.
■ The water tanks have to be emptied and rinsed out before you put away the device.
1. Make sure that the mains plug is pulled out.
22
2. Empty the dirty water tank. For this, push the release
button back and pull the tank out of the main unit by the
handle.
3. The cap is on the back of the tank. Turn it 90° counter-
clockwise to open it.
4. Pour out the dirty water and rinse the tank out thoroughly
with warm water.
6. Take the fi lter out of the holder and rinse it off with warm
water.
7. Take the protective motor fi lter out of the main unit and
rinse it off with warm water.
8. Pour the leftover cleaning solution out of the fresh water
tank and clean the tank thoroughly with warm water.
9. Allow all parts to dry completely before storing them.
5. The exhaust fi lter is located in
the housing of the dirty water
tank. Depress the release but-
ton and pull out the fi lter holder.