Assembly - Blackstone 1554 Manuel De L'utilisateur

WARNING:
The manufacturer has made every effort to eliminate any sharp edges. However, you
should handle all components with care to avoid accidental injury. Tools required: The only tool
needed is a Phillips Screwdriver needed for minimal assembly on the cover and main body handles.

ASSEMBLY:

Please read all instructions thoroughly before proceeding. Find a large, clean area in which to
assemble your grill. Please refer to the parts list and assembly diagram as necessary. Grill assembly
involves large components; therefore, it is advised to have two people set up the unit.
Make sure all the plastic protection is removed before assembling
NOTICE:
Step 1:
Step 1:
Open the Leg assembly. See Below
Open the Leg assembly: See below.
Pull out
Leg assembly
Valve knob
14