Ancona GCP530 Instructions D'utilisation page 14

Replacing the light bulbs:
IMPORTANT:
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE
CARRYING OUT ANY OPERATION ON THE APPLIANCE.
• Make sure the range hood is unplugged or turn OFF breaker.
• Open the filter and find the spring of the light.
• Push the spring and the lights will slip out.
• Replace with a 4 Volt, 2.5Watt max, LED lights. Do not touch replacement bulb with bare hands!
• Turn ON breaker and range hood to test for operation.
CAUTION: BULB MAY BE HOT, PLEASE TAKE OUT THE BULB WHEN THE BULB IS
COMPLETELY COOL!
REPLACING THE BULBS:
14