Publicité
Les langues disponibles
Les langues disponibles
Changing the LED light Warning! If the LED light is
damaged. DO NOT CHANG IT BY THE USER!
Changing the LED light carry out by inexperienced
persons may cause injury or serious malfunctioning. It
must be replaced by a qualified persons in order to
avoid a hazard. Contact your local Service
Force Center for help.
● Before changing the LED light, switch off the
appliance and unplug it, or pull the fuse or the circuit
breaker.
● LED light data:220-230V~, MAX 2W.
● Unplug the mains plug.
● To change the LED light, undo the screw.
● Changing the defective LED light .
● Put the refrigerator back into operation.
Screw
LED light
REVERSING THE DOOR
The side at which the door opens can be changed, from
the rig ht side(as supplied) to the left side, if required.
Warning! When reversing the door, the appliance must
not be connected to the mains. Ensure that the plug is
14
Publicité
