Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Starting up and temperature regulation
● Insert the plug of the connection lead into the plug
socket with protective earth contact. When the
refrigerator compartment door is opened, the internal
lighting is switched on. After the fridge has been placed
in position, wait for 5 minutes before electricity is
supplied. Don't store anything until the temperature
inside the fridge becomes low enough.
● The temperature selector knob is located on the rig ht
of the refrigerator compartment.
Setting 0 means:
Off.
Clockwise rotate the knob to turn on the appliance.
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Important! Normally we advise you select setting of 2 or
3 or 4, if you want the temperature higher or colder
please turn the knob to warmer or colder setting
accordingly. When you turn the knob to colder which
can lead to the more energy efficiency-Otherwise, it
would result in more energy-consuming. Iportant! High
ambient temperatures (e.g. on hot summer days) and a
cold setting (position 6 to 7) may cause the compressor
to run continuously or even non-stop!
Reason: when the ambient temperature is high, the
compressor must run continuously to maintain the low
temperature in the appliance.
13
Publicité
