GE GFD45 Manuel D'utilisation Et D'installation page 13

REVERSING THE DOOR SWING (if desired)
REINSTALL HINGE ASSEMBLY (cont.)
3
B. Hold the hinge in place and turn the door over.
Install the hinge using the 6 machine screws
removed earlier.
REINSTALL HINGE COVER
4
A. Turn the door over and place the hinge cover in
the opposite side of the door as shown. Align the
hinge cover holes with the holes in the door.
Installation Instructions
Hinge
Hinge cover
shown on
opposite
side
REINSTALL HINGE COVER (cont.)
4
B. Hold the hinge cover in place and turn the door
over. Install the hinge cover using the 2 tapping
screws removed earlier.
Hinge
Cover
MOVE STRIKE BRACKET
5
A. Using a putty knife or any other flat tool, remove
the 4 beauty buttons located on the dryer where
the door will be installed and install them on the
opposite side.
13