Festo DNCV Série Notice D'utilisation page 25

DNCV−...
Select the fitting variant to suit your application.
S
Further fitting possibilities for Fig. 6 are described in the Festo catalogue and
the necessary accessories are described in the chapter Accessories."
Variants (examples)
With foot fastening type HNC−...
Fig. 6
Tighten the fastening screws to an equal extent.
S
The tightening torques are shown in the table below:
Type
Tightening torque
Size
Fig. 7
Fasten the work load to the piston rod.
S
Take into account here the maximum per
mitted forces and torques (see Technical
specifications").
Festo DNCV−... 0303b English
With swivel fastening type SNC−...
DNCV−32−... DNCV−40−... DNCV−50−... DNCV−63−...
4 Nm 5 Nm
M6 M6
8 Nm 8 Nm
M8 M8
Fig. 8
25