Publicité
Les langues disponibles
Les langues disponibles
2 ] Reinstall wiring cover and attach it to the hood using its retaining screw.
Ensure both tabs on inner top of hood are engaged in their corresponding slots in
wiring cover. Also, take care not to pinch wires while reinstalling wiring cover.
LED Light Bulbs
The BCSQ1 Series range hoods require two LED light bulbs (120 V, 4 W max., with GU10 base),
included.
BULB LEADS
1 ] Align the bulb leads with the small indentations located on the border of the lamp location on
hood (see inset above), then install the bulbs by placing the bulb leads into their grooves in
the socket.
2 ] Gently push upwards and turn clockwise until secure.
NOTE: The Suction Cup Tool (included with hood) can be used to install and remove light bulbs.
Press suction cup tool on bulb and rotate counterclockwise to remove bulb or clockwise to
install bulb.
Install the Filters
Ducted Installation Only:
Re-install grease filters removed in step 2 , page 8, under "Prepare the Hood" .
Non-ducted Installation Only:
Purchase two non-ducted filters from your local distributor or retailer (see product specification
label for filter type). Attach the non-ducted filters following instructions packed with the
non-ducted filter.
SCREW
!
CAUTION
BULB LEAD
GROOVES
(IN SOCKET)
TABS ON INNER
TOP OF HOOD
ENGAGED IN
WIRING COVER
SLOTS.
SUCTION
CUP TOOL
13
Publicité
