Dexter 650ID2.5 Mode D'emploi page 198

FR
2. SAFETY INSTRUCTIONS
ES
• If you are interrupted when operating the drill, complete the process and
swit
PT
• Periodically check that all nuts, bolts and other fixings are properly tightened.
• When using the drill, use safety equipment including safety glasses or shield,
IT
hearing protection, and protective clothing including safety gloves. Wear a
dust mask if the drilling operation creates dust.
EL
• Children and frail people must not use this tool. Children should be supervised at
all times if they are in the area in which the tool is being used. It is also imperative
PL
that you observe the accident prevention regulations in force in your area.
• Even when the tool is used as prescribed it is not possible to eliminate all
UA
residual risk factors.
RO
THE FOLLOWING HAZARDS MAY ARISE IN CONNECTION WITH THE
TOOL'S CONSTRUCTION AND DESIGN:
EN
√ Damage t
√ Damage t
√ Hand-arm vibration syndrome if its use is not adequately managed.
3. DESCRIPTION
1. Keyless chuck
2. On/O Switch
1
Keyless chuck
3. Lock-on button
4. Forward/reverse switch
2
On/O
5. Impact/Drill switch
3
Lock-on button
6. Auxiliary handle
7. Gauge
4
Forward/reverse switch
5
Impact/Drill switch
6
Auxiliary handle
7
Gauge
re looking up.
ctive hearing protection is not worn.
tch
ctive dust mask is not worn.
7
5
7
1
1
6
6
198
5
4
2
4
3
2
3