Télécharger Imprimer la page

Atag WI60211BC Mode D'emploi page 44

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
Grease filters
Carbon filter
Removing the door
Lighting
EN 8
Removing the grease filters
Open the lock on the filters and remove the filters.
• Attention! Clean the grease filters each month with soapy water.
When washed in a dishwasher, the grease filter may be discoloured
slightly. This is normal and does not affect its filtering capacity.
2x
Replacing the carbon filter
The saturation of the filter depends on the intensity of use. However,
the carbon filter needs to be replaced at least every four months.
• Attention! The carbon filter cannot be washed for reuse. Saturated
carbon is not environmentally friendly. Change the filter regularly.
• Open the door and push the brackets on the side of the door
inwards. Pull the door out of the guide.
• Place the panel door on the cooker hood again, first at the top and
then at the bottom.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for illumination
of this appliance. The lamp is not suitable for household room
illumination.

Publicité

loading

Ce manuel est également adapté pour:

Wi60211cm