Télécharger Imprimer la page

Atag WI60211BC Mode D'emploi page 45

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION
General
This appliance must be connected to the electric mains by an
authorised installer who is familiar with the safety precautions and
will carry them out. The appliance is in compliance with European
guidelines.
Important information:
• The distance between the lowest point of the cooker hood and
a gas hob must be at least 65 cm. If using an electric, ceramic
or induction hob, this distance must be at least 55 cm.
• If the cooker hood is connected to an existing exhaust duct,
no other appliance must be connected to the duct (such as
a hot water heater or a stove).
• Consider local regulations with respect to the ventilation of gas
appliances.
• The shorter the duct, and the fewer bends in it, the better the
cooker hood will work.
• Check before you start drilling that no installation pipe(s) is/are
present.
• The connection pipe to the cooker hood has a diameter of
150 mm or 125 mm (depending on the model). We recommend
that the exhaust pipe has the same diameter.
• The enclosed installation materials are suitable for reinforced
concrete and brick walls. For some types of wall you may need
special plugs and screws.
EN 9

Publicité

loading

Ce manuel est également adapté pour:

Wi60211cm