Publicité
Les langues disponibles
Les langues disponibles
3.
Insert the cover plate on the freezer compartment
door.
15. Adjusting the door spring
Rotate the adjusting screw with a cross-head
screwdriver.
I = maximum spring tension
0 = no spring tension
26
16. Mounting the air separator
Fasten the air separator to the furniture door in order to
separate the supply and waste air.
The following is a special installation
step. Instructions are provided after
section C.
Door limitation pin, see "Adjusting the
door opening angle".
Installation of the appliance is now complete.
Publicité
