Publicité
Les langues disponibles
Les langues disponibles
2.0 LOCATING APPLIANCE
DUE TO HIGH TEMPERATURES, THIS ELECTRIC APPLIANCE SHOULD BE LOCATED OUT OF
TRAFFIC. KEEP COMBUSTIBLE MATERIALS SUCH AS FURNITURE, PILLOWS, BEDDING, PAPERS,
CLOTHES AND CURTAINS AT LEAST 36" FROM THE FRONT OF THE APPLIANCE.
NEVER LOCATE THIS ELECTRIC APPLIANCE WHERE IT MAY FALL INTO A BATHTUB OR OTHER
WEAR SAFETY GLOVES, SAFETY FOOTWEAR, AND SAFETY GLASSES FOR PROTECTION DUR-
TO PREVENT CONTACT WITH SAGGING OR LOOSE INSULATION, THE ELECTRIC APPLIANCE
MUST NOT BE INSTALLED AGAINST VAPOR BARRIER OR EXPOSED INSULATION. LOCALIZED
DO NOT EXPOSE THE ELECTRIC APPLIANCE TO THE ELEMENTS (SUCH AS RAIN, ETC.)
2.1
UNPACKING AND TESTING APPLIANCE
Carefully remove the appliance from the box and remove the support brackets. Prior to installing the
appliance, remove all packaging material and test to make sure the appliance operates properly by plugging
the power supply cord into a conveniently located 120V,15 Amp minimum grounded outlet.
2.2
GROUNDING APPLIANCE
This appliance is for use on 120 volts. The cord has a plug
as shown in (A). An adapter as shown in (C) is available for
connecting three-blade grounding type plugs to two-slot
receptacles. The green grounding plug extending from the
adapter must be connected to a permanent ground such as
a properly grounded outlet box. The adapter should not be
used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove
plug from outlet.
NOTE: Must be connected to a dedicated15 amp circuit. The
use on an extension cord is NOT permitted.
!
WATER CONTAINER.
ING INSTALLATION AND MAINTENANCE.
OVERHEATING COULD OCCUR AND A FIRE COULD RESULT.
WARNING
GROUNDING METHODS
METAL SCREW
(A)
GROUNDING PIN
(C)
NOT ALLOWED IN CANADA
COVER OF
(B)
GROUNDED
OUTLET BOX
ADAPTER
GROUNDING
MEANS
96.1
W415-1438 / A / 06.02.17
7
EN
Publicité
