10
3.3.1 APPLIANCE INSTALLATION
A.
With two people, lift the appliance up and insert into the opening, leave a 3/8" (9.5mm) gap between
EN
the appliance and floor base. Do not push or slide the bottom of the appliance on the floor base, see
Figure 1.
B.
Set the appliance down and into place, see Figure 2.
Fig. 1
ÉTAPES 1: SOULEVER
APPLIANCE
APPAREIL
W415-1438 / A / 06.02.17
MANTEL
STEP 1: LIFT
TABLETTE
STEP 2: INSERT
ÉTAPES 2: INSÉREZ
DO NOT SLIDE APPLIANCE
!
NE GLISSEZ PAS L'APPAREIL
F
1/4"
APPLIANCE
APPAREIL
STEP 3: SET APPLIANCE
ÉTAPES 3: RÉGLÉ APPAREIL
1/4"
MANTEL
!
MANTEL
TABLETTE
DO NOT SLIDE APPLIANCE
!
NE GLISSEZ PAS L'APPAREIL
Fig. 2
MANTEL
MANTEL
TABLETTE
APPLIANCE
APPAREIL
STEP 3: SET APPLIANCE
ÉTAPES 3: RÉGLÉ APPAREIL
!