Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Door Alarm
• When power is connected to the refrigerator, the
door alarm is initially set to
alarm display will show
When you press the
change to
(OFF) and the door alarm function
will be deactivated.
• When either the refrigerator or the freezer door is
left open for more than 60 seconds, the alarm tone
will sound to let you know the door is open.
• When you close the door, the door alarm will stop.
Lock
• When power is initially connected to the
refrigerator, the Lock function is off.
• If you want to activate the Lock function to lock
other buttons, press and hold the
3 seconds or more. The
and the Lock function is now enabled.
• When the Lock function is activated no other
buttons will work. The dispenser pad is also
deactivated.
• To disable the Lock function, press and hold
the
button for 3 seconds or more.
Temperature Mode (°F <->°C)
• If you want to convert °F to °C or vice versa, press
and hold the
button and
same time for 5 seconds or more.
USING YOUR REFRIGERATOR
(ON) and the door
(ON).
button, the display will
button for
sign will be displayed
button at the
CAUTION
Demo Mode
(Store showroom floor Demostration Mode)
The Demo Mode disables all cooling in the refrigerator
and freezer sections to conserve enegy while on
display in a retail store.
1. To activate:
With the refrigerator door opened, press and hold
the
and
5 seconds. The control panel will beep to confirm
that the Demo Mode is activated.
2. To deactivate:
With the refrigerator door opened, press and hold
the
and
seconds. The control panel will beep to confirm that
the Demo Mode is deavtivated.

AIRFLOW

In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. The
arrows in the figure indicate air vent locations and
direction of airflow.
Do not block any of the cool air vents with food
packages. If the vents are blocked, airflow will be
interrupted and temperature and
moisture problems may occur.
If you add a large amount of food,
the refrigerator will take longer to
cool it.
At initial start-up, allow your
refrigerator to run for 2 or 3 hours
before placing food in it.
Caution When Closing the Door
CAUTION
To reduce the risk of door
scratches and breaking the door
mullion, please make sure that
the refrigerator door mullion is
always folded in.
If moisture gathers on the
refrigerator door mullion at any
point, turn off the Energy Saver
mode until the issue is resolved.
21
buttons at the same time for
buttons at the same time for 5

Publicité

Table des Matières
loading

Table des Matières