TOOLCRAFT 1619736 Mode D'emploi page 32

12. Technical data
Operating voltage ..............................................................................................230-240 V/AC, 50 Hz
Power consumption ...........................................................................................400 W
Idle rotational speed ..........................................................................................1800 rpm
Brush diameter ..................................................................................................max. 110 mm
Weight ...............................................................................................................2.3 kg
Sound pressure level L
Sound power level L
WA
Standard deviation K .........................................................................................3 dB (A)
Guaranteed sound power level (in accordance with 2000/14/EC) ....................96 dB(A)
Vibration level (in accordance with EN 28662-1) ...............................................2.20 m/s² (main handle)
Uncertainty K .....................................................................................................1.5 m/s²
Important!
The noise level of the appliance may exceed 80 dB(A). Wear suitable ear defenders to prevent hearing
damage.
The vibration emission value stated in this manual was obtained using a standardized EN 28662-1 test
procedure. The result can be used to compare vibration levels of different electrical tools. It can also be
used to obtain a preliminary estimate of your exposure to vibrations.
The specified value indicates the vibration level when the tool is used for its intended purpose. The actual
vibration level may differ from the specified value if the tool is used for other purposes, if other tools are
used, or if the tool has not been serviced properly. These factors can considerably increase your exposure.
For an accurate estimate of your exposure, account for the times when the appliance is switched off or not
in use. These factors can considerably decrease your exposure.
Use additional safety measures to protect the user against vibrations (e.g. service the tool and any other
tools used, keep the user's hands warm and use structured work procedures).
32
...................................................................................83 dB(A)
PA
......................................................................................91 dB (A)