Free-Wheel Function; Battery Care - Nacecare Numatic iINTERNATIONAL TTB 2120/100T Mode D'emploi

ALWAYS ENSURE THAT THE MACHINE IS ON LEVEL GROUND BEFORE
!
NEVER DISENGAGE THE BRAKE WHEN THE MACHINE IS ON A SLOPE /
The TTB 2120 is equipped with a free-wheel function that will enable the operator to move the
machine.
59
The Free-wheel lever can be found on the right hand side of the rear axle (Fig.59).
To disengage the brake, pull the lever into the down position (Fig.60).
Re-engage the brake by moving the lever into the up position.
!
When the brake is disengaged the machine is in Free-wheel mode and has no
braking facility. Care must be taken when moving the machine in Free-wheel mode.
To ensure your machine remains at its maximum efficiency and prolong your battery life,
please follow the simple steps below:
DISENGAGING BRAKE ARM.
GRADIENT.
Under normal daily usage:
Recharge batteries after each use regardless of machine operation time.
Recharge the machine fully after its last use. Do not leave the machine in
a discharged state.

Free-Wheel Function

60
20

Battery Care

!
!