Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
!
Always ensure that the machine is switched off prior to any maintenance.
A
C
42
Before removing the separator, first pull off the connected hose (Fig.42).
Remove the separator and rinse using clean water (Fig.43).
The separator also has a sealing-rubber which should be examined at
every clean-down (Fig.44).
Note: The separator can be hung from either side of the top tank
while you maintain the machine using the clip on the front of the lid.
(Fig.45).
After use, empty waste-water tank using emptying hose and
flush-out with clean water.
Next remove floor-tool vacuum hose ensuring you remove the
U-bend clip and flush out with clean water.
B
Next empty clean water tank, using emptying hose and again
flush out with clean water.
43
When refitting the separator make sure you engage the tab (A) at
the front of the separator BEFORE pushing the separator down.
Refit the vacuum hose.
Machine Cleaning
A
C
15
B
44
45
!
A
Publicité
Table des Matières
