Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
10.
The camera warning light is not switching on automatically.
• The camera siren cannot switch on automatically. You can control the camera siren manually using a
compatible Lorex NVR or app. Refer to your NVR's documentation for full instructions.
• Ensure that you have enabled and configured white light deterrence using a compatible NVR. See your
NVR's documentation for full instructions.
11.
No audio.
• Audio is only supported on Lorex NVRs. For a list of compatible NVRs, visit lorex.com/compatibility.
• Ensure NVR volume is turned on / turned up.
• Ensure audio function on camera is turned on (see 'Audio Settings', page 16).
• Ensure audio is turned up on viewing device.
12.
Two-way talk not working.
• Use the Lorex app specified in your NVR documentation to activate two-way talk. Tap
camera's live view, then speak into the microphone on your mobile device. Tap again when finished
speaking.
Need help?
Visit
help.lorex.com
•
Download product guides
•
Watch how-to-videos
•
Find related troubleshooting tips & FAQs
Register your product
Please see our full Terms of Service and Limited Hardware Warranty Policy at
lorex.com/warranty.
from the
Copyright © 2021 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
19
for up-to-date information and resources:
E893DD_QSG_TRILINGUAL_R2
Publicité
