Publicité
Les langues disponibles
Les langues disponibles
Using deterrence features
Automatic deterrence settings
To enable the automatic warning light from the NVR:
1.
From the camera's live view, right-click and then click Main Menu.
2.
Enter the system user name (default: admin) and password.
3.
Click EVENTS > Event Settings > Motion > Smd/Deterrence.
4.
Under Camera, select the channel connected to the smart deterrence camera.
5.
Check Person and/or Vehicle to enable each type of smart detection.
6.
Click Set > Area under each detection type you have enabled to set the active areas.
7.
Click Set > Schedule to set the weekly schedule.
8.
For Duration, choose how long the warning light will stay on when motion is detected.
9.
Select Warning Light for a solid white light, or Strobe for a flashing light. If you select strobe,
set how quickly the light will flash under Strobe Frequency.
10. Click Apply to save.
Manually activate deterrence features
To manually activate the warning light and/or siren features:
Prerequisite: Connect to your Lorex system using the app specified in your NVR's documentation.
1.
Launch the Lorex app and tap your NVR to view connected channels.
2.
Tap a connected smart deterrence camera to open it in single-channel view.
3.
Tap
to activate the warning light, or tap
13
to activate the siren.
14
Publicité
