Publicité
Les langues disponibles
Les langues disponibles
Using deterrence features
Manually activate deterrence features
To activate deterrence features on all connected cameras, push and hold the front panel
panic button on the NVR for 3 seconds.
Note:
For full instructions on using the deterrence features, refer to the NVR's manual on
your product page at lorex.com.
Audio settings
ATTENTION:
Audio recording and listen-in audio are disabled by default. Audio recording
and/or use of listen-in audio without consent is illegal in certain jurisdictions. Lorex Corporation
assumes no liability for use of its products that does not conform with local laws.
To enable audio recording and listen-in audio from the NVR:
1.
From the camera's live view, right-click and then click Main Menu.
2.
Enter the system user name (default: admin) and password.
3.
Click Camera and select Recording.
4.
Under Channel, select the channel connected to the audio-capable camera.
5.
Under Main Stream, click on the button More Setting.
6.
In the the pop-up window:
A. Enable Audio Encode for audio recording
and listen-in audio. (Note: Listen-in audio
requires a monitor with speakers or
speakers connected to the NVR.)
B. Select the Audio Format that will be used
to record audio. ACC is recommended.
7.
Click OK to save changes.
15
16
Publicité
