Publicité
Les langues disponibles
Les langues disponibles
Front Panel Menu Reference
This is an overview of the front-panel menus. Press the softkeys to access the front panel menus.
Menu heading
Source Settings >
Sense 2w/4w
Out Pref Volt/Curr
Protection >
Voltage Slew >
Output Settings >
On/Off Coupling >
Output Inhibit >
Operation Mode >
Output LIST >
Run/Stopped
Add
Delete
Clear All
Properties >
Data Logger >
Waveform Settings >
Run/Stopped
Properties >
Auto Scale
Utilities >
Store/Recall >
I/O Config >
Test/Setup >
Error >
Manage Files >
Lock | Unlock
62
Description
Configures the output sense to 2-wire or 4-wire.
Configures the preferred mode for output on/off transitions.
Configures the protection setting for the output.
Configures the voltage slew rate.
Enables or disables the output coupling or synchronization between multiple output channels.
Configures the inhibit input mode and Digital IO Pin 3.
Configures the output capability when two independent outputs are being used.
Runs or stops the output LIST.
Inserts a new step to the list.
Deletes a specified step from the list.
Clears all the steps in the list.
Configures the output LIST settings.
Adjusts waveform vertically (voltage/division, current/division, or power/division) or horizontally (time/-
division).
Runs or stops the data logger.
Configures the data log traces and voltage and current measurement ranges for individual outputs.
Also configures the data log duration, sample period, Min/Max values as well as trigger position.
Auto-scales the traces on the display.
Saves and recalls instrument states.
Displays and configures the I/O parameters for remote operations over the USB, LAN, GPIB, or digital
IO interface.
Accesses the self-test, calibration, and help function as well as configures the user preferences, and
sets date and time.
Displays the instrument's error queue. Errors will be cleared after viewing or instrument reset.
Creates, copies, deletes, and renames files and folders on the USB drive attached to the front panel.
Also allows you to capture the current screen to either a bitmap (*.bmp) or portable network graphics
(*.png) file.
Locks and unlocks the display.
Keysight E36200 Series User's Guide
Publicité
