Keysight Technologies E36200 Serie Mode D'emploi page 45

Installing the optional GPIB interface
TURN OFF POWER AND REMOVE ALL CONNECTIONS PRIOR TO INSTALLATION
Turn off the power and remove all connections, including the power cord, from the instrument prior install-
ation of the GPIB interface.
RETAIN GPIB COVER PLATE
After installing the GPIB option, retain the cover plate for use in the event that you ever remove the GPIB
option. The instrument should never be connected to power or inputs on the output terminals without either
the GPIB module or the cover plate securely covering the rear-panel opening.
The following tools are required.
– Phillips head screwdriver
Make sure you turn the power supply upside down before proceeding.
Keysight E36200 Series User's Guide 45