Hansgrohe AXOR 250 2jet 35297 1 Serie Instructions De Montage / Mode D'emploi / Garantie page 2

T EC HN I C A L I N FO RMATIO N
Max. flow rate
35297xx1, 35312xx1
35365xx1, 35319xx1
I NSTA LL ATI O N CO N SIDE R ATION S
⁄ For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
⁄ Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
⁄ Make sure that the entire fastening surface is even
and smooth (no protruding seams or tile offset), that
the finish of the wall is suitable to apply the product
and has no weak points.
⁄ This showerhead is for use with rough #26434181
(not included).
⁄ #35297xx1, 35312xx1 only: This showerhead is
for use with automatic compensating valves rated at
1.9 GPM (7.2 L/min) or less.
2
E N G L I S H
2.5 GPM (9.5 L/min)
1.75 GPM (6.6 L/min)
⁄ #35365xx1, 35319xx1 only: This showerhead is
for use with automatic compensating valves rated at
1.3 GPM (4.9 L/min) or less.
⁄ To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher than
120°F (49°C). In Massachusetts, the maximum
output temperature can be no higher than 112°F
(44°C).
⁄ The shower arm is intended only to hold the shower
head. Do not load it down with other objects!
⁄ Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.