3. OPERATING YOUR APPLIANCE (
CONTINUED)
FUNCTIONS
TEMPERATURE MEMORY FUNCTION
If the power is suddenly lost, the set temperature will be saved by the unit. Once the power is back on,
the unit will be at the same set temperature.
"CLOSE DOOR" REMINDER FUNCTION
If you forget to close the door or the door is not fully closed, there will be warning alarm after five (5)
minutes.
TEMPERATURE ALARM FUNCTION
If the interior temperature is higher than 23° C (73° F), the "HI" message is shown on the display panel
and a buzzer alarm will sound continuously after one hour. This indicates that the inner temperature is
too high and you should look for the reason. If the inner temperature is lower than 0° C (32° F), the
"LO" message is shown on the display panel. The alarm and the malfunction indicator light go on at
the same time.
NOTES
If too many bottles are put in at once or the door has not been closed tightly, the unit will display the
"HI" message on the display panel. This is normal. Please wait five (5) minutes after closing the door
and the "HI" message will disappear.
It is normal that the display shows the "HI" or "LO" message from time to time. If it occurs frequently
or lasts for a long time, you can restart the unit by unplugging it, then re‐plugging after five (5)
minutes. If the problem occurs again after restarting, please contact Customer Service.
Before reconnecting the power, wait three (3) to five (5) minutes. Otherwise, you could damage your
appliance. If you attempt to start the appliance before the end of this time delay, the appliance will
not turn on.
If you turn on the appliance for the first time or after a restart, or after it has been out of
operation for a long time, there may be a temperature difference between the temperature inside the
appliance and that on the LED display. This is a normal event caused by the duration of the activation
period. Leave the appliance turned on for several hours and the temperatures will stabilize during
operation.
23