Publicité
1. Engine oil filler cap
2. Engine oil dipstick
1. Bouchon de remplissage d'huile de moteur
2. Jauge d'huile
1. Tapa de relleno de aceite de motor
2. Varilla de medición del aceite de motor
Engine oil
Engine oil level measurement
1. Remove panel F. (See page 8-31 for panel
removal and installation procedures.)
2. Place the ATV on a level surface and warm
up the engine for several minutes.
3. Stop the engine.
4. Remove the engine oil filler cap and wipe off
the dipstick with a clean rag.
5. Insert the dipstick in the filler hole without
screwing it in.
NOTE:
_
Wait a few minutes until the oil level settles before
checking.
_
8-33
EBU01099
Publicité
