Lincoln SKF SL-41 Instructions D'utilisation Et D'entretien page 4

EMAIL: robert.collins@skf.com WEBSITE:
This U.K. Declaration of Incorporation is
issued under sole responsibility of the
manufacturer. Lincoln Industrial Corporation
hereby declares that the partly completed
machinery stated below:
Name: SL-41 Injectors
Model number(s):
82294-1, 82294-2, 82294-3, 82294-4,
82294-5, 82292, 82295
Description: Metering Valve (Series A)
Year of CE: 2023
in its intended use, is in conformity with the
relevant union harmonization legislation:
Supply of Machinery (Safety) Regulations
2008 (S.I. 2008:1597)
I, the undersigned of Lincoln Industrial Corporation, hereby declare that the equipment specified above, in its intended use, conforms with the
Essential Health and Safety Requirements of U.K. legislation Supply of Machinery (Safety) Regulations 2008 No. 1597 Annex I, Declaration of
Incorporation by the time of placing it on the market.
___________________________________
Robert Collins
Technical Compliance Manager
St. Louis, MO, U.S.A.
2023/02/23
U.K. Declaration of Incorporation *
Manufacturer name/address:
Lincoln Industrial Corporation
5148 N. Hanley Road
St. Louis, MO 63134 U.S.A.
TEL: +1 (314) 679-4200 FAX: +1 (314) 679-4367
Authorized to compile the technical file:
SKF (U.K.) Limited
2 Canada Close
Banbury, Oxfordshire, OX16 2RT, GBR
along with the following Directive(s) that
were also applied with the above legislation:
EN ISO 4413: 2010
Hydraulic fluid power - general rules and
safety requirements for systems and their
components
EN ISO 12100: 2010
Safety of machinery. General principles
for design. Risk assessment and risk
reduction
BS EN IEC 63000:2018
Technical documentation for the
assessment of electrical and electronic
products with respect to the restriction of
hazardous substances
www.skf.com
The following EHSR (Essential Health and
Safety Requirements) have been applied:
1.1.2a – 1.1.2b – 1.1.2c – 1.1.2d – 1.1.3 –
1.1.5 – 1.3.2 – 1.3.3 – 1.3.4 – 1.3.6 - 1.3.7
– 1.5.3 – 1.5.4 – 1.5.13 – 1.7.1 – 1.7.1.1 –
1.7.3 – 1.7.4
The manufacturer maintains a technical file
summary sheet containing test reports and
product documentation:
Technical file summary sheet number:
RA402375
*
4
DOCUMENT NUMBER
UK402375CA
Indicates change.