Belkin OmniCube F1D092 Guide D'utilisation page 12

P73050/F1D092AM/man.qxd
Hardware Installation
6.
Connect the first computer's keyboard cable to the OmniCube
another PS/2 cable (Belkin Part# F2N036-XX), connect one end to the
PS/2 keyboard port on the computer, and the other end to the PC1
keyboard port on the back of the OmniCube
AT-style keyboard port, you will need a PS/2-AT keyboard adapter
(Belkin Part# F2N018).
7.
Double check all the connections. Make sure the keyboard and mouse
cables go to the correct ports.
8.
Repeat steps 4-6 for the second computer.
9.
Attach the power supply to the power supply connector at the back of
the OmniCube
done last. You should see the LED for Port 1 on the front panel blink,
and hear a beep. Power up your monitor.
10.
You can now power up both computers simultaneously. The first
computer will show up on the monitor. Check to see if the keyboard,
mouse and monitor work. If this is okay, press the SELECT button and
check the functionality of the second computer. If you find any errors,
double check all the cable connections.
4/28/00 1:43 PM Page 8
Back of OmniCube ™
™ . Plug this into any available AC outlet. This must be
8
(continued)
. Using
™
™ . If your computer has an
F2N036-XX