NEC MultiSync FE772M Manuel D'utilisation page 10

Controls
- continued
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor is quick and easy with the On Screen Display Control system. A
short example is quick and easy given below to familiarize you with the use
of the controls. The following section is an outline of the available adjustments
and selections you can make using the OSD.
NOTE: Allow the monitor to stabilize for at least 0 minutes before making image
adjustments.
Case 1
Case 2
To make adjustments in the On Screen Display, follow these steps:
. Press the MENU (or OSD) Button, then the main menu of the OSD appears.
. To access a control, use the p or q Buttons. When the desired icon is
highlighted, press the SELECT (or SET) Button.
pq
. Use the
. Accept the changes by pressing the SELECT (or SET) Button.
. Exit the OSD by Pressing the MENU (or OSD) Button.

tu
/ Buttons to adjust the item to the desired level.