Operation and function
Lighting on/off
Defrost
To adjust temperature.
Push button in 2 sec.
Electronic controls
The electronic controls ensure that the set
temperature is maintained.
Following any power failure, the tempera-
ture settings are automatically recalled.
Manual defrosting
If there is a need for manual defrosting,
push the Defrost botton for more than 2
second and a manual defrost will start.
After 30 min. the electronic control will
return to normal mode
Temperature display
The display shows the actual temperature
in the cabinet, and indicates that power is
connected.
Temperature setting
Push the Set button on left side in 2 sec,
afterwards you can change the temperature
+/- with the buttons on right side.
Beware
Pushing the Unit On/Off button stops the
compressor and the light is switched off.
Pushing the Unit On/Off button re-activates
the compressor, but the light remains turned
off. The light is switched on by pressing the
Light On/Off button.
9
GB
Temperature +/-
Unit on/off
fig. 13